Hybrid Cross-Domain Builds · Advanced

Adaptive Desk Environment

Desk system combining occupancy, light, temperature, and motorized adjustment. Desk system combining occupancy, light, temperature, and motorized adjustment.

Components

  • ESP32 desk sensors
  • light/temperature
  • actuator mock-up

Build steps

  1. Inventory the board, actuators, sensors, and power rails listed for H06.
  2. Build and inspect the low-voltage wiring against the supplied connection diagram before connecting actuators.
  3. Flash the firmware, run the startup self-check, and record the printed board and firmware version.
  4. Calibrate the sensors and limits, then run the acceptance tests at the lowest safe energy level.

Test and expected result

Test each subsystem independently, then verify safe priority handling.

Safety and limits

Low-voltage mock-up only.

Download Arduino source code

Download connection diagram SVG

Adaptive Desk Environment project illustration