Industrial & Biomedical Automation · Intermediate

Medication Box Reminder

Non-dispensing reminder box with compartments, light, and acknowledgement input. Non-dispensing reminder box with compartments, light, and acknowledgement input.

Components

• MCU
• RTC
• LEDs/buzzer
• acknowledgement buttons

Build steps

1. Inventory the board, actuators, sensors, and power rails listed for I09.
2. Build and inspect the low-voltage wiring against the supplied connection diagram before connecting actuators.
3. Flash the firmware, run the startup self-check, and record the printed board and firmware version.
4. Calibrate the sensors and limits, then run the acceptance tests at the lowest safe energy level.

Test and expected result

Schedule accuracy, missed acknowledgement, battery state, and accessibility checks.

Safety and limits

Reminder only; never dispense or verify medication intake.

Download Arduino source code

Download connection diagram SVG