Smart Home & Building Mechatronics · Intermediate

Thermal Comfort Mapper

Multi-room temperature and humidity mapping for a small building. Multi-room temperature and humidity mapping for a small building.

Components

  • Multiple ESP32 sensor nodes
  • clock sync
  • logger

Build steps

  1. Inventory the board, actuators, sensors, and power rails listed for S05.
  2. Build and inspect the low-voltage wiring against the supplied connection diagram before connecting actuators.
  3. Flash the firmware, run the startup self-check, and record the printed board and firmware version.
  4. Calibrate the sensors and limits, then run the acceptance tests at the lowest safe energy level.

Test and expected result

Sensor calibration, timestamp alignment, missing-node handling, and data export.

Safety and limits

Document sensor tolerances and ambient conditions.

Download Arduino source code

Download connection diagram SVG

Thermal Comfort Mapper project illustration