Wireless Auditing & RF Projects · Advanced

RF Field Notebook

Permission-scoped RF observation and signal logging for known test transmitters. Permission-scoped RF observation and signal logging for known test transmitters.

Components

• SDR/ESP32/approved receiver
• logger
• antenna metadata

Build steps

1. Inventory the board, actuators, sensors, and power rails listed for W01.
2. Build and inspect the low-voltage wiring against the supplied connection diagram before connecting actuators.
3. Flash the firmware, run the startup self-check, and record the printed board and firmware version.
4. Calibrate the sensors and limits, then run the acceptance tests at the lowest safe energy level.

Test and expected result

Use only owned or authorized signals; document band, antenna, location, and privacy boundaries.

Safety and limits

Passive and permission-scoped only; no interception or disruption.

Download Arduino source code

Download connection diagram SVG