Wireless Auditing & RF Projects · Advanced

Zigbee Mesh Reliability Rig

Measure route changes and packet delivery in an owned mesh. Measure route changes and packet delivery in an owned mesh.

Components

  • Zigbee nodes
  • coordinator
  • route logger

Build steps

  1. Inventory the board, actuators, sensors, and power rails listed for W05.
  2. Build and inspect the low-voltage wiring against the supplied connection diagram before connecting actuators.
  3. Flash the firmware, run the startup self-check, and record the printed board and firmware version.
  4. Calibrate the sensors and limits, then run the acceptance tests at the lowest safe energy level.

Test and expected result

Node join, route repair, packet loss, latency, and reset recovery.

Safety and limits

Use an isolated lab mesh.

Download Arduino source code

Download connection diagram SVG

Zigbee Mesh Reliability Rig project illustration