Wireless Auditing & RF Projects · Advanced

Wireless Sensor Time-Sync Rig

Compare timestamp drift across wireless sensor nodes. Compare timestamp drift across wireless sensor nodes.

Components

  • Wireless nodes
  • sync protocol
  • timestamp logger

Build steps

  1. Inventory the board, actuators, sensors, and power rails listed for W10.
  2. Build and inspect the low-voltage wiring against the supplied connection diagram before connecting actuators.
  3. Flash the firmware, run the startup self-check, and record the printed board and firmware version.
  4. Calibrate the sensors and limits, then run the acceptance tests at the lowest safe energy level.

Test and expected result

Measure offset, drift, reconnect behavior, and clock-source assumptions.

Safety and limits

Use synthetic identifiers and non-sensitive data.

Download Arduino source code

Download connection diagram SVG

Wireless Sensor Time-Sync Rig project illustration